Our maintenance of film faced plywood should start from the details, and generally do a good job in the maintenance of the details. In the future use of the building formwork, there will be no circumstances that affect the use effect.
1. When using film faced plywood for the first time, if it needs to be cut and punched, then we must seal the incision with a special edge sealant. When punching, we must place a wooden square under the film faced plywood, so that Can prevent cracks in film faced plywood. At the same time, care should be taken to ensure the integrity of the film faced plywood.
2. Film faced plywood should be thoroughly cleaned of dirt on the surface with a scraper after demolding. If it needs to be stored for a long time, we need to apply some oil on its surface, cover it with a rain cloth during storage, and avoid Sun and rain, and the building formwork should be placed flat on the ground.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
